卷簾門主要功能是保溫、防塵、防蟲、隔音、抗風等，使車間保持恒溫、恒濕、潔凈的工作環境。適用于食品、醫藥、電子、橡膠、化工、汽車、紡織、物流等領域。下面來講講濟南卷簾門易磨損部件正確的維護方法：

The main functions of rolling shutter doors are insulation, dust prevention, insect prevention, sound insulation, wind resistance, etc., to maintain a constant temperature, humidity, and clean working environment in the workshop. Suitable for fields such as food, medicine, electronics, rubber, chemical, automotive, textile, logistics, etc. Next, let's talk about the correct maintenance methods for the easily worn parts of Jinan roller shutter doors:

1、密封圈

1. Sealing ring

密封圈是密封油缸活塞桿與缸筒之間的關鍵部件，一般均采用配備進口密封圈。主要是密封性好、耐磨、使用時間長。

The sealing ring is a key component between the piston rod and cylinder barrel of the sealing oil cylinder, and is generally equipped with imported sealing rings. Mainly due to good sealing, wear resistance, and long service life.

2、電控開關

2. Electric control switch

在操作時，電控開關是主要的操作按鈕，使用頻率非常高，如果出現按鍵失靈等情況，應當立即停止工作，并斷開電源，進行檢修，不可盲目使用，防止發生隱患。

During operation, the electric control switch is the main operating button, which is used frequently. If the button fails or other situations occur, the work should be immediately stopped and the power should be disconnected for maintenance. Blindly using it is not allowed to prevent potential hazards.

3、支桿

3. Support rod

支桿是連接泵站與桿之間的關鍵部件，液壓油缸的起升支撐，貨物的搬運承載都是靠支桿來支持和達到一種平衡，由于在搬運貨物時，可能出現超載、偏載等現象往往會導致支桿的變形或斷裂。

The support rod is a key component connecting the pump station and the rod. The lifting support of the hydraulic oil cylinder and the carrying capacity of goods are all supported and balanced by the support rod. Due to the possibility of overloading, eccentric loading, and other phenomena during the transportation of goods, the deformation or fracture of the support rod often occurs.

4、油缸

4. Oil cylinder

油缸在整個卷簾門升降過程中起到關重要的作用的，也是通過它來實現貨物的上升與下降的。

The oil cylinder plays a crucial role in the entire lifting process of the rolling shutter door, and it is also used to achieve the lifting and lowering of goods.

5、輪胎

5. Tires

卷簾門輪胎是一種磨損品，長時間的使用會磨損的，而升降機的輪胎也分很多種如：尼龍輪、PU輪、聚氨酯包尼龍、橡膠輪、電木倫等。大多數升降機配備尼龍輪，是因為市場普遍、便宜，但是磨損度較差，行走起來噪聲也大。

Roller shutter door tires are a type of wear and tear product that can wear out after prolonged use, and there are many types of elevator tires, such as nylon wheels, PU wheels, polyurethane wrapped nylon, rubber wheels, electric wooden wheels, etc. Most elevators are equipped with nylon wheels because they are common in the market and cheap, but have poor wear and noise when walking.

6、泵站

6. Pump station

泵站是所有卷簾門中關鍵的部分，一旦泵站出現問題，也是說宣告停止工作，即使其他部件再好，都不可能在工作。

The pump station is a crucial part of all rolling shutter doors. Once there is a problem with the pump station, it is said to have stopped working, even if other components are good, they cannot be working.

而泵站是有非常多的零部件共同組成，其中出現問題的有防塵圈、O型密封圈、鋼球等一下配件，一旦發現這些配件出現問題或者在使用過程中磨損、損壞，解決方法是更換，更換這些配件。更多的事項就來我們網站http://m.wurkt.com咨詢！

The pump station is composed of many components, including dust rings, O-ring seals, steel balls and other accessories that have problems. Once these accessories are found to be faulty or worn or damaged during use, the solution is to replace them. For more details, come to our website http://m.wurkt.com consulting service