如果你已經買了車庫門，那么一定目睹過它偶爾發生的一些小故障，雖然很少發生，但是還是需要了解的。下面跟著小編一起來看看濟南車庫門使用期間的五點小故障處理。

If you have bought a garage door, you must have seen some small faults that happen occasionally. Although they rarely happen, you still need to know. Now let's follow the small editor to see how to deal with the five small faults during the use of the garage door in Jinan.

1、用手動開關或遙控器不能啟動驅動裝置，驅動裝置沒有接通電源，手動開關或遙控接收板斷路，運行次數過多導致電機熱保護，檢查插座、插頭、手動開關、保險管熔絲，檢查手動開關及遙控接收板接線，重新定位行程開關以增加行程;

1. The driving device cannot be started with the manual switch or remote control, the driving device is not powered on, the manual switch or remote control receiving board is open circuit, and the motor thermal protection is caused by too many times of operation. Check the socket, plug, manual switch, fuse of the fuse, check the wiring of the manual switch and remote control receiving board, and reposition the travel switch to increase the travel;

2、車庫門關不嚴或開不完全，行程開關位置調節不正確，重新定位行程開關以增加行程;

2. The garage door is not closed tightly or opened completely, and the position of the travel switch is adjusted incorrectly. Reposition the travel switch to increase the travel;

3、手動開關能控制驅動裝置而遙控器不能，遙控器未對碼，遙控系統故障，按照說明書指導完成對碼操作，更換遙控器內部電池，請維修人員檢查接收控制板;

3. The manual switch can control the drive device, but the remote control cannot. The remote control does not match the code. The remote control system fails. Complete the code matching operation according to the instructions. Replace the internal battery of the remote control. Ask the maintenance personnel to check the receiving control board;

4、車庫門未關緊就自動反向運行或開門時未接觸行程開關就中途停止運行，開關門阻力大于設置啟閉負載力了障礙感應系統，連桿長度調節不當，拉開離合裝置，檢驗門體與扭簧是否平衡、啟閉是否靈活，增大開閉負載力，在門關閉時調節連桿長度;

4. The garage door automatically runs in the reverse direction when it is not closed tightly, or stops running halfway when it is not contacted with the travel switch when opening the door. The resistance of opening and closing the door is greater than the set opening and closing load force, which activates the obstacle sensing system. The length of the connecting rod is not adjusted properly, open the clutch device, check whether the door body and the torsion spring are balanced, whether the opening and closing are flexible, increase the opening and closing load force, and adjust the length of the connecting rod when the door is closed;

5、門體單向運行行程開關損壞或行程開關線短路，光電開關光路上有障礙物啟閉負載力調節沒有到位，檢查行程開關及行程開關接線，光電形狀光路上的障礙物，重新調節啟閉負載力。

5. The one-way travel switch of the door body is damaged or the travel switch wire is short circuited. There are obstacles in the optical path of the photoelectric switch. The opening and closing load force is not adjusted properly. Check the travel switch and the travel switch wiring, remove the obstacles in the photoelectric shape optical path, and readjust the opening and closing load force.

車庫門使用期間的五點小故障處理相關內容就講解到這里了，您對此有什么疑惑或者需求可以關注我們網站http://m.wurkt.com進行咨詢！

This is the end of the five points related to the troubleshooting of the garage door during its use. If you have any doubts or needs, please follow our website http://m.wurkt.com Consult!