聯系我們

濟南富強門業有限公司
聯系人:林經理
電話:151 6888 2846
郵箱:527800164@qq.com
地址:濟南市歷下區化纖廠路8號3號樓101號
濟南卷簾門如何做好系統維護
來源:http://m.wurkt.com 日期:2021-02-13 發布人:
濟南卷簾門在客戶購買后,想要門體系統長久的使用,應該在日常使用中,做好哪些系統方面的維護、保養那?
Jinan roller shutter door in the customer purchase, want to door system long-term use, should be in daily use, what system aspects of the maintenance, maintenance that?
需要手動檢查的方面:
Areas requiring manual inspection:
1、對卷簾門的外觀檢查門軌、門扇有無變形、卡阻現象,手動按鈕箱是否良好。
1. For the appearance of rolling shutter door, check whether the door rail and door leaf are deformed and jammed, and whether the manual button box is in good condition.
2、卷簾門的電箱指示信號是否正常、箱體是否完好。
2. Whether the indication signal of electric box of rolling shutter door is normal and whether the box is in good condition.
3、開啟按鈕箱門,檢查按鈕是否能正常使用。
3. Open the door of the button box and check whether the button can be used normally.

自控檢查的方面:
Aspects of self-control inspection:
1、用燃著的香煙等煙源測試系統中任一煙感器,發現不能啟動要及時檢查并修理。
1. Test any smoke sensor in the system with a burning cigarette and other smoke sources. If it fails to start, it should be checked and repaired in time.
2、對卷簾進行清掃除塵,若有油漆局部變形的地方進行修復,確保卷簾門的外觀整潔、美觀。
2. The rolling shutter shall be cleaned and dusted, and the partial deformation of the paint shall be repaired to ensure the appearance of the rolling shutter door clean and beautiful.
卷簾門的年度保養:
Annual maintenance of rolling doors:
1、對卷簾門控制箱自檢按鈕,故障警報消聲鍵,復位鍵進行專門檢查。
1. The self check button, fault alarm silencing key and reset key of rolling shutter control box are specially checked.
2、緊固各電線接頭,清潔控制箱內灰塵檢查箱內電氣元件是否齊備。
2. Fasten the wire joints, clean the dust in the control box, and check whether the electrical components in the box are complete.
下一篇:淺談卷簾門操作注意事項 上一篇:卷簾門的門框要怎樣安裝
閱讀/ Recommended reading
- 濟南卷簾門使用中的調整要點:適配場景與氣候的實用指南 2025-07-24
- 濟南卷面門組成的相關解析 2025-07-22
- 濟南卷簾門常出現的問題有哪些? 2025-07-18
- 濟南卷簾門軌道怎么清潔? 2025-07-16
- 濟南卷簾門具備防火性質的必備條件 2025-07-11
- 濟南卷簾門的安裝與拆卸方式方法 2025-07-10
- 白與黑的卷簾門:不止于色彩的差異 2025-07-09
- 濟南卷簾門常見的優點解析 2025-07-08
濟南卷簾門定制所需資料解析
2025-07-25
濟南卷簾門定制需基于具體安裝環境與使用需求提供詳細資料,這些信息直接影響產品尺寸精度、功能適配性與安裝穩定性。充分準備資料能避免因信息缺失導致的返工或使用不便,確保定制的卷簾門...