遙控卷簾門在固定的滑道內，以門上方卷軸為轉動上下的門。這種門使用廣泛，每日都會多次開啟關閉，而組好維護保養遙控卷簾門工作才能讓其使用長久，那么遙控卷簾門開門電機日常的基本維護是怎樣的？

The remote control roller shutter door is located in a fixed slide, and the upper and lower doors are rotated with the scroll above the door as the center. This kind of door is widely used, and it will be opened and closed many times every day. However, it can only be used for a long time if the maintenance of the remote control roller shutter door is well organized. What is the basic daily maintenance of the remote control roller shutter door opening motor?

1、濟南遙控卷簾門廠家提醒使用者，要保持卷簾門開門電機周圍環境的干燥，潮濕會使卷簾門開門電機的壽命大大縮減，開門電機的進風口、出風口要保持沒有異物、線條、纖維等阻礙電機的運轉。

1. Jinan remote control roller shutter door manufacturer reminds users to keep the surrounding environment of the roller shutter door opening motor dry. Dampness will greatly shorten the service life of the roller shutter door opening motor. The air inlet and outlet of the door opening motor should be kept free of foreign matters, lines, fibers and other obstacles to the operation of the motor.

2、卷簾門開門電機的熱保護起作用時應立即停止使用，檢查卷簾門開門電機產生熱保護作用的原因，一般產生熱保護作用有一下幾點：

2. When the thermal protection of the roller shutter door opening motor works, it should be stopped immediately. Check the reasons for the thermal protection of the roller shutter door opening motor. Generally, the thermal protection is as follows:

（1）開門電機的超負荷使用(指牽引力不夠)；

(1) Overload use of door opening motor (insufficient traction);

（2）開門電機的使用時間過長；

(2) The service time of the door opening motor is too long;

（3）熱保護作用的設置調低了。

(3) The setting of thermal protection is lowered.

3、卷簾門開門電機工作時間久了要定期的涂潤滑劑，這樣才能保證開門電機的磨損消耗減少，更好的散熱，建議半年上一次潤滑劑，使用好的潤滑劑能大大增加電機的穩定性，遇到劣質的潤滑劑應及時更換并用汽油清洗軸承以及軸承蓋的油槽。

3. The roller shutter door opening motor has been working for a long time and needs to be coated with lubricant regularly, so as to ensure that the wear consumption of the door opening motor is reduced and the heat dissipation is better. It is recommended to use the lubricant once a half year. The use of good lubricant can greatly increase the stability of the motor. In case of poor quality lubricant, it should be replaced in time and the oil groove of the bearing and bearing cover should be cleaned with gasoline.

4、長時間使用的開門電機開始發出噪聲，說明開門電機的軸承已經磨損完了，當軸承的游徑方向向下游走的時候，應該立即更換軸承不能在使用開門電機了，如不立即更換軸承接下來可能要更換整臺的開門電機了。

4. The door opening motor that has been used for a long time starts to make noise, indicating that the bearing of the door opening motor has been worn out. When the radial direction of the bearing moves downward, the bearing should be replaced immediately. The door opening motor can no longer be used. If the bearing is not replaced immediately, the whole door opening motor may need to be replaced.

5、拆裝開門電機的時候要注意：如果沒有必要拆下風扇還是建議先攻軸伸端取出轉子或者從非深端取出轉子都可以，防止損壞定子繞組或絕緣的情況發生，更換繞組時要記得原繞組的纏繞形式，以及圈數規格等，不能隨意的更改繞組的設計方式否則容易出事故。

5. Attention should be paid when disassembling the door opening motor: if it is not necessary to remove the fan, it is recommended to take out the rotor at the shaft extension end or take out the rotor from the non-deep end to prevent damage to the stator winding or insulation. When replacing the winding, remember the winding form of the original winding, and the specification of the number of turns, etc., and do not change the design method of the winding at will, otherwise it is easy to cause accidents.

此外對電動卷簾進行加潤滑油、配件保養和整體保養應根據實際使用情況定期進行，保養人員應具備專門的技術能力，更換維修的配件應保證配套。如無專門的技術能力不可私自進行保養與維修遙控卷簾門。更多相關內容就來我們網站http://m.wurkt.com咨詢！

In addition, the lubricating oil, parts maintenance and overall maintenance of the electric roller shutter should be carried out regularly according to the actual use. The maintenance personnel should have special technical ability, and the replacement and maintenance of parts should ensure the matching. Do not maintain and repair the remote control roller shutter without special technical ability. Come to our website for more relevant content http://m.wurkt.com consulting service